Short answer: A multi-site internet leased line quote is only comparable when every site is priced on the same terms: bandwidth, last-mile media, uptime SLA, mean time to restore, latency commitment, static IP allocation, CPE ownership, redundancy and contract period. Put all of that in a single site table before you ask providers to bid, and the cheapest quote will stop looking cheap for the wrong reasons.
Key takeaways
A leased line (ILL) is dedicated and symmetrical. Broadband is shared and contended. The price gap is the contention ratio.Price per Mbps is meaningless without the SLA, the restore time and the last-mile media behind it.Feasibility, right of way and building readiness decide delivery dates in Chennai more often than commercials do.Redundancy must be designed per site, not bought uniformly for every branch.One quote format across providers is the only way to compare fairly.What is an internet leased line?
An internet leased line is a dedicated, symmetrical connection between your site and the provider's network, with committed bandwidth that is not shared with other customers. A 100 Mbps ILL gives you 100 Mbps up and down, backed by a service level agreement with uptime and restoration commitments. Business broadband, by contrast, is a contended service: the advertised speed is a maximum, shared with other users on the same segment, usually asymmetric, and typically without a meaningful restoration SLA.
Bandwidth — Internet leased line: Dedicated, symmetrical, 1:1 — Business broadband: Shared, contended, asymmetric — Point-to-point / MPLS: Dedicated between named sitesTypical use — Internet leased line: Head office, data centre, critical branches — Business broadband: Small branches, backup link — Point-to-point / MPLS: Site-to-site private trafficUptime SLA — Internet leased line: Contracted, with penalties — Business broadband: Best effort — Point-to-point / MPLS: ContractedRestoration — Internet leased line: Committed MTTR — Business broadband: No firm commitment — Point-to-point / MPLS: Committed MTTRStatic IPs — Internet leased line: Yes, usually a block — Business broadband: Rarely, often one — Point-to-point / MPLS: Not applicableCost per Mbps — Internet leased line: Highest — Business broadband: Lowest — Point-to-point / MPLS: HighMost multi-site designs mix all three: leased lines where downtime is expensive, broadband as a secondary path, and an overlay that fails traffic over automatically. That overlay is usually SD-WAN.
Build the site table first
Providers cannot quote accurately from "we need links for 7 branches". Before you go to market, build one row per site with:
Exact address with pin code, floor and the building contact for survey accessPrimary bandwidth required, and whether burst is neededSecondary link requirement: none, broadband backup, or diverse-media leased lineLast-mile preference: fibre, and whether radio is acceptable where fibre is not feasibleStatic IP count and whether BGP with your own IP block is requiredCPE: who owns, manages and replaces the router, and whether a managed firewall sits behind itUsers on site and the applications they depend onRequired live date, and whether the site is already occupied or still a fit-outA warm shell or under-fit-out office changes everything about the delivery plan — the feasibility survey may pass while the building is not ready for cable entry.
What to insist on in the commercial section
Uptime SLA, stated as a monthly percentage, with the measurement method and the credit payable when it is missed. Ask what is excluded — planned maintenance, force majeure and customer-site power are the usual carve-outs.MTTR, the committed mean time to restore, split by fibre cut, CPE failure and power issues. For a critical site, this number matters more than the uptime percentage.Latency and jitter commitments, especially for voice, video and any application hosted in a specific cloud region.Installation and one-time charges, including any civil work, in-building cabling or right-of-way deposit.Contract term, lock-in and exit terms, plus what happens if you relocate the site mid-term.Escalation matrix with names, numbers and timelines at each level, not a generic helpdesk number.Link monitoring and reporting: who monitors availability, how incidents are raised, and what the monthly report contains.Bandwidth upgrade terms — the cost and lead time to move from 100 Mbps to 200 Mbps mid-contract.Redundancy: design it per site
Ask three questions about each site. What does an hour of downtime cost here? Is there an alternate way for people to work? Can we accept a slower backup path?
The answers lead to one of four patterns:
Single leased line. Low-impact sites, where a few hours of downtime is tolerable.Leased line plus broadband backup. The common branch pattern: full service normally, degraded but working during an outage.Leased line plus 4G or 5G failover. Useful where a second wired path is not feasible, or for new sites awaiting fibre.Dual leased lines from different providers, with diverse last-mile routes. For head office, data centre and revenue-critical sites.Diversity only counts if the two paths do not share the same duct, the same building entry point or the same upstream aggregation point. Ask the provider to confirm diversity in writing; ducts are shared more often than quotes suggest.
Chennai-specific delivery factors
Feasibility survey results vary street by street. A site in an IT park on OMR, a factory in Sriperumbudur or Oragadam, and an office in T Nagar can get very different answers on the same day.Right of way and building permissions often decide the date. Get the landlord or facility manager involved before signing.In-building infrastructure: cable entry route, riser access, MDF space, power and UPS for the CPE, and a lockable rack. Many delays happen inside the building, not outside it.Monsoon-season cable cuts make the restoration SLA and the backup path worth more than a small discount on monthly rental.Multi-state sites in Bangalore or Hyderabad should be quoted on the same template so the design stays consistent across the network.RFP checklist you can send to providers
Site table with address, pin code, bandwidth, backup requirement and required live dateUptime SLA percentage, measurement method and credit structureCommitted MTTR per fault categoryLatency and jitter commitments, with the reference pointLast-mile media per site and confirmation of route diversity where orderedStatic IP allocation and BGP supportCPE model, ownership, management and replacement timelineManaged firewall or security services, if bundledInstallation charges, civil work and any depositsContract term, exit clause and relocation termsUpgrade pricing and lead timeEscalation matrix with names and response timesMonitoring, reporting and monthly review commitmentReference customers of similar size in the same cityCommon mistakes
Comparing only the monthly rental, then discovering the restoration commitment is best effort.Ordering identical links for every site regardless of what downtime costs there.Buying two connections from the same provider and calling it redundancy.Leaving IP addressing and firewall ownership undefined until installation day.No power protection for the CPE, so the link is down whenever the building power is.Signing a three-year term without upgrade pricing agreed upfront.Forgetting to brief the landlord, then losing weeks to building permissions.Frequently asked questions
What bandwidth does a branch office need?
It depends on applications, not headcount alone. Map concurrent users, video conferencing, cloud application traffic, backup windows and any voice load, then size with headroom for growth and leave room for backup traffic during an outage.
Is a leased line worth it over business broadband?
For a site where downtime stops revenue or operations, yes. The value is in the committed restoration time and symmetrical bandwidth, not in raw speed. Many businesses use a leased line primary with broadband backup to balance cost and resilience.
How long does installation take in Chennai?
Delivery depends on feasibility, right of way and in-building readiness. Ask each provider for a committed timeline per site in the quote, with the survey completed before you sign, rather than an indicative average.
Can we keep our IP addresses if we change providers?
Only if you hold your own IP block and run BGP. Otherwise addresses are provider-assigned and will change, which affects firewall rules, VPN peers, DNS records and anything whitelisted by a customer or a bank.
Should the provider manage our firewall too?
Bundling can simplify support, but keep the security policy, logs and change control under your own governance. Define clearly who can approve a firewall rule change and how it is logged.
How do we connect branches to cloud workloads efficiently?
Through an SD-WAN overlay or a private circuit to the cloud region, depending on traffic volume and latency sensitivity. See Hybrid Cloud Connectivity for how private circuits and VPN designs compare.
Who should own day-to-day link monitoring?
Either your IT team or a managed services partner with a NOC. What matters is that someone sees the link drop before the branch calls. See Managed IT Support for Multi-Site Businesses.
Get your multi-site connectivity designed and quoted
Layots Technologies designs and manages multi-site connectivity for businesses across Chennai, Bangalore and Hyderabad: provider-neutral site surveys, leased line and broadband mix, SD-WAN overlay, managed CPE and firewall, and a single NOC view across all branches.
Send us your site list with locations and the applications each branch depends on. A solution architect reviews it and comes back with a connectivity design and a comparable, costed proposal, usually within one business day.
Book a 30-minute virtual meeting with a solution architect — request your free IT assessmentCall +91 99623 95939WhatsApp the team for a quick requirement discussionRelated reading: SD-WAN and Secure Access for Multi-Branch Businesses in Chennai · Data Centre Colocation in Chennai · Choosing an IT Infrastructure Partner in Chennai